General Spectrometer Accessories
Glass Expansion Quartz Torch High Solids with Sheath Gas for 700-ES or Vista Axial
Quartz Torch, single-piece (High Solids with Sheath Gas), 2.4 mm ID injector (2010122400). Recommended for high total dissolved solids (TDS) analysis with Agilent (Varian) axial 700-ES, Liberty and Vista Series ICP-OES. Used with auxillary gas module (AGM) 1 for control of sheath gas flow, provides better performance than the standard high solids torch. Suitable for routine analysis of high TDS up to 25% but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End PVC Pump Tube 3tag, 72mm spacing, 1.85mm ID, Green/Green (PKT 6)
Contour Flared End PVC Pump Tube 3tag 1.85mm ID Green/Green (PKT 6).Tag Colors: Green/GreenID mm: 1.85Wall Thickness mm: 0.86OD mm: 3.57Overall Length: 455mm (72mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion SeaSpray U-Series Nebulizer 2mL/min, Includes NFT-16-75 UniFit Connector with 0.75mm ID x 1.6mm OD x 700mm long tubing (1 piece), and EL-1 EzyLok Connector Kit
SeaSpray Nebulizer 2.0 mL/min, includes UniFit Connector with 0.75 mm ID x 1.6 mm OD x 700 mm long tubing (1 pc.) and EzyLok Connector Kit (1 pc.).Optimum nebulizer gas flow rate is 1.0 L/min and sample flow rate is 2.0 mL/min. Recommended not to exceed optimum 2.0 mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40 psi at 1.0 L/min gas flow rate. Tolerates up to 20% TDS. We recommend the use of the Elegra Argon Humidifier to achieve best performance with high TDS.Replacement parts include P/Ns NFT-16-75 and 502702994.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Consider upgrading to our new Direct Connect (DC) SeaSpray to take advantage of the cost-effective design improvements.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Nickel Skimmer Cone for ELAN 9000/6x00/DRCs
Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. They have been designed to maximize signal stability and to minimize clogging during extended runs of samples containing high dissolved solids.
Glass Expansion TruFlo Sample Monitor 1.0ml/min for HF
TruFlo Sample Monitor 0.05 mL/min for HF. This TruFlo Sample Monitor provides a measurable flow range of 0-1.0 mL/min, a calibrated flow range is 0.03-1.0 mL/min, & has an internal volume of 0.055 mL. The sample path is made from HF resistant materials. The TruFlo is an indispensable diagnostic tool providing continuous real-time sample flow measurement, sounds out-of-range alarm, stores 24 hours of data, is ideal for sample introduction by peristaltic pump or natural aspiration, & is suitable for all ICP-OES and ICP-MS instruments. Do you ever need to repeat the analysis of a sample due to a blocked nebulizer, worn peristaltic pump tubing, or incorrect pressure of the pump tubing clamp? With the digital display of the TruFlo Sample Monitor, you always know the actual rate of sample uptake to your nebulizer. For routine aqueous and non-HF compatible models see 501907281, 501907282, and 501907283.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Chemplex Industries SAMPLE CUPS 31.0MM DIA. DBL OP
CHEMPLEX XRF SAMPLE CUPS, 31 Dia., mm, Double open ends, Snap-On Rings have integrated thin-film and Microporous Film trimmer
International Crystal IR CARDS POT BROMIDE 25PK
Real Crystal; IR Sample Card, KBr, 19mm Aperture, 2 in. x 4 in., Fit in the Universal Slide Mount of any Spectrophotometer, Do not Exhibit the Strong Absorbance Peaks, Transmit in Excess of 80% of the Available Energy
Thermo Scientific Quartz Reactor 18 MM DIAM 1 EA
Cylindrical quartz vessel with inner diameter of 18 millimeters used as chemical reactor in laboratory settings for analytical scale chemistry experiments and procedures due to inertness to many chemicals, ability to withstand high temperatures, and ultraviolet light transmission; provides small reaction volume suitable for analytical procedures.
Glass Expansion MicroMist U-Series Nebulizer 0.6mL/min, Includes NFTS-16-75 UniFit Connector with 0.75mm ID x 1.6mm OD x 1500mm long tubing (1 piece), and EL-1 EzyLok Connector Kit
MicroMist Nebulizer 0.6 mL/min, includes UniFit Connector with 0.75mm ID x 1.6mm OD x 1500mm long tubing (1 pc.) and EzyLok Connector (1 pc.).Optimum nebulizer gas flow rate is 0.7 L/min and sample flow rate is 0.6mL/min. Recommended not to exceed optimum 0.6mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read ~40psi at 0.7 L/min gas flow rate. Can tolerate up to 15% TDS. MicroMist is the standard configuration for many ICP-MS manufacturers due to its excellent sensitivity and precision.Replacement parts include P/Ns NFTS-16-75 and 502702994.Recommend nebulizer maintenance tools, Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Consider upgrading to our new Direct Connect (DC) MicroMist to take advantage of the cost-effective design improvements.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Nickel Skimmer Cone for x-lens Agilent 7700x/7800/7850/8800 ICP-MS (G3280-67041)
Nickel Skimmer Cone for x-lens (G3280-67041) ¿ For Agilent 7700x/7800/7850/8800 ICP-MS. Standard cone used x-lens and suitable for most common applications (e.g., routine aqueous environmental samples, <5% acid matrix, non-HF, non-organic). Not for samples containing hydrofluoric acid (HF). Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. Use Skimmer ConeGuard (70-803-1008) to protect cone threads during cleaning. When not in use, keep cones stored in original packaging for protection.For corrosive acids, including HF, use Pt Skimmer with Cu Base for x-lens, P/N 501907590, must be mounted on brass adaptor skimmer base. For organic analysis, use Pt Skimmer with Ni Base for x-lens, P/N 501907591, which must be mounted on brass adaptor skimmer base. For lowest Ni background & laser ablation applications, use Al Skimmer for x-lens, see AT7702X-Al.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Revvity Health Sciences Inc LabChip Instrument Diagnostics Test Chip A
LabChip Instrument Diagnostics Test Chip A
C Technology Inc 23MM X 13MMID SOLO VPE VESSELS
This item has a minimum qty of 5 per supplier requirements. 23MM X 13MMID SOLO VPE VESSELS
Perkin Elmer US LLC Adjustable Torch Body Assembly for Avio 500
This Torch Body Assembly is included in the Quick Change Torch Module with Cyclonic Spray Chamber/Concentric Nebulizer for Avio 500 (N0810607), Quick Change Torch Module with Scott Spray Chamber/Cross-Flow Nebulizer for Avio 500 (N0810606), and the Organics Sample Introduction System for Avio 500 (N0810609). This assembly includes: Cassette for Avio 500 Torch Body Assembly, Qty. 1 (N0810214) Viton O-Ring, 20.29 mm I.D., Qty. 2 (09902223) PTFE-Coated Blue O-Ring, 2.57 mm I.D., Qty. 2 (N0791334) Torch Knurled Nut, Qty. 1 (N0776027) Torch Washer, Qty. 1 (N0776028) Torch Spacer, Qty. 1 (N0791125) Torch Glass, Qty. 1 (N0790131)
Perkin Elmer US LLC Air Filter for AAnalyst 600/700/800
Replacement air filter for the Flow Injection Amalgamation System. The air filter should be periodically inspected, cleaned, and replaced if necessary.